Product evolution is a fundamental issue for any activity. SIMMM distinguishes itself in the market because of its constant solution research and evolution is our greatest claim to fame. Here there are the 9 focal points that show the constant evolution of our products.

 

A complete range. (We design pumps)

Una gamma completa

A complete range. (We design pumps)

Active on the national and international market, SIMMM Engineering designes and produces reciprocating pumps and high pressure professional cleaners. Thanks to years of experience, SIMMM is able to produce "axial" and "rod/crank" pump groups, both with high efficiency and high pressure/capacity. Our experience allowed to satisfy a more and more expanding market. All the SIMMM pump groups and the high pressure cleaners are certified by the most prestigious European quality brands.

We have got something more. (And you can see this)

Abbiamo Qualcosa in più.

We have got something more. (And you can see this)

The pump groups are not all the same. By designing the SIMMM AXA model, SIMMM wanted to distinguish itself from the traditional models. The AXA pump group is equipped with ceramic pistons and with an integrated by-pass valve which ensures a direct pressure adjustment without leakages. The special configuration of the suction and delivery valves (patented) ensures a more accurate absorption control improving the efficiency noticeably, producing pressures (200 bar) which were up to now unthinkable, with absorptions smaller than 14 A with single-phase use (230 Volt). Besides, the technology used allowed the SIMMM AXA group to maintain the By-Pass status up to 5 hours without any wear on the sealing rings.

1.450 revolutions/min. (Single-phase/three-phase use)

1.450 giri/min.

1.450 revolutions/min. (Single-phase/three-phase use)

All high pressure cleaners produced by SIMMM have an impressive range of models (10) with the distinctive feature of working up to 1.450 revolutions/min both in the single-phase and in the three-phase use. A little number of revolutions of the engine, ensures the pump group longevity reducing the wear of its mechanical components. All the models designed by SIMMM as, Power Cleaner, Power Line, Hydro Gun, Water Gun are made in association with SIMMM AXB and SIMMM AXA groups. SIMMM AXA group is able to offer pressures from 100 bar (12 lt/.min) to 150 bar (10 lt./min) up to 200 Bar (7 lt./min.)

Our pump groups work in a good way. (Without water too)

I nostri gruppi pompa lavorano bene.

Our pump groups work in a good way. (Without water too)

Many of the traditional pump groups hardly work in the "By-Pass" phase, that is when the gun trigger is released, water recirculates inside the pump overheating brass parts, valves and sealing rings. This phase is considered extreme and can be tolerated only for few minutes. Thanks to the use of new technologies and to the AXA model design, SIMMM was able to produce the only axial pump that can resist up to 5 hours without any wear during the By-pass phase.

75°C (with a cold water high pressure cleaner)

75°C

75°C (with a cold water high pressure cleaner)

The high pressure cleaner good efficiency and working condition can be found in the fundamental natural element: water. A proper and constant water capacity ensures a lower engine pump group stress and a higher longevity. SIMMM high pressure cleaners can be feeded with water up to 75° and can work for several hours without optional expensive KIT. The mechanical and thermal action of water ensures a better removal of the most persistent dirt as well as disinfection without buying a cold water high pressure cleaner.

Work at 200 Bar. (but at 220 Volt/single-phase)

Lavorare a 200 Bar.

Work at 200 Bar. (but at 220 Volt/single-phase)

An appropiate pressure is important as much as an appropiate water capacity. Up to now it was necessary to buy a high pressure cleaner with a three-phase use to reach 200 Bar pressures. It ensured high performances with the disadvantage of buying a heavy model, limited only to 400 Volt 50 Hz voltage(220 - 60 Hz.) and therefore with higher costs. SIMMM with the AXA model managed to optimize the trinomial absorption/pressure/efficiency, by reaching 200 Bar pressure through a simple 3 Hp engine. With absorption smaller than 14 A. Up to now it is the only machine on the market with these preformances.

Our machines are "open" (we do not hide anything)

 Le nostre macchine sono aperte

Our machines are "open" (we do not hide anything)

Transparency is the main principle for any relationship, therefore SIMMM, for its products, shows the most important components of its high pressure cleaners. All the motor pump groups are easily identifiable (no plastic coats) for an easy maintenance and for rational water supply connection. The engine group is well "protected" by a plastic body characterized by a high mechanical resistance. The steel supporting structure contains also standard fittings such as pipes, gun and multi regulation lance.

We love sincerity (We are honest).

Amiamo la trasparenza.

We love sincerity (We are honest)

All the SIMMM products are certified by the most important international quality brands, among which the "TÜV", known as the most important one as regards safety and efficiency of the procedures used. SIMMM wants to be sincere to its customers, therefore all the technical data, such as the pressure and the capacity indicated in the catalogues, must be considered "effective" that is "real", controlled by our technicians. Words which can be easily misunderstood such as "Maximum pressure or acceptable overpressure" are never used not to confuse the customer.

Read 6817 times

NOTE! This site uses cookies and similar technologies.

If you not change browser settings, you agree to it. Learn more

I understand